Helix Linear Technologies Blog | Lead Screws

Assembling lead screws into your machine or device can get tricky if you dont have the right tools and a screw design that helps make things easy.

Lead screws and ball screws have been the most trusted and cost effective means of translating rotational energy to linear motion.

Lead screws are an excellent linear motion product that converts rotary motion to linear motion very economically and until recently offered only moderate accuracy and repeatability.

Coatings are made up of resin, additives, and a liquefying agent that’s either “water-based” or “solvent-based”. Water-based coatings and solvent-based coatings have distinct purposes that depend on your needs. One coating may work better under mild weather conditions.

The question constantly being asked is, what's so essential about perfecting backlash design for acme lead screws? This acme lead screw backlash survival guide will answer that question and give you the information you need to accommodate backlash in your linear motion design.

There are a bevy of factors that dictate the performance of a lead screw, to include how it is mounted, as we covered in our last article. However, we believe that the most important factor is the pairing of the lead screw with the lead screw nut.

In order to ensure that an acme lead screw serves a particular application correctly, there are a variety of factors that need to be considered. In fact, there are four primary things to consider when it comes to lead screw selection: load, speed, length of travel and end fixity.

When it comes to lead screw performance, it's all about axial load and rotational speed (RPM). As you likely know, the relationship between these two factors is known as "pressure velocity", or the PV curve. Simply put, this PV curve defines the safe limits of load and speed.

It goes without saying that there are a lot of factors that go into selecting the right lead screw for your linear motion application. In a previous post, we told you about the importance of critical speed, which is defined as the speed that excites the natural frequency of the screw.

There are a variety of factors that must be considered before screw selection is determined in any type of application. One factor that should not be overlooked when it comes to selecting lead screws is critical speed. Lead screws, like any object in our environment, have a natural frequency.